Condensing Unit With Piston Compressors With CO2 Refrigerant
video
Condensing Unit With Piston Compressors With CO2 Refrigerant

Condensing Unit With Piston Compressors With CO2 Refrigerant

Condensing Unit With Piston Compressors with CO2 refrigerant

Condensing Unit With Piston Compressors with CO2 refrigerant

 

Zhexue brand Condensing Unit With Piston Compressors with CO2 refrigerantr is new design  product. Those type condensing unit usually match with air cooled condenser. Sometimes , we choose evaporative condenser.

 

CO2 is a new friendly refrigerant for total refrigeration system.

its advantages are as follows:

1. safety and green resource 

2. perfect heat exchange effciency 

3.cheaper than freon

4. compact design 

5.evironment friendly machine

 

 

Zhexue Condensing Unit  piston Compressors with CO2 refrigerant with its high technology design , we also get many records from our government , in last two years , our company was recorded as high-tech company in our province. In future , our condensing unit will service more cold storage and offer best foods for everyone.

 

Performance parameters

 

condensing unit with CO2 refrigerant 
Unit model MBZBFF2-
80M(Y)
MBZBFF2-
100M(Y)
Refrigerant R22(R404A/R507A)
Power supply 380V/3P/50HZ
Compressor Model 6GE-40 6FE-50
Qty 2 2
Evaporating Temperature -20℃~+10℃
Evap.Temp -8℃ Cooling capacity(KW) 137.2 165.4
-8℃ Power input(KW) 52.4 63.8
-8℃ Running current(A) 99.8 137.8
Liquid pipe(mm) Φ35 Φ35
Suction pipe(mm) DN65 DN65
Discharge pipe(mm) Φ54 Φ54
Receiver inlet(mm) Φ42 Φ42
Overall size L(mm) 2500 2500
W(mm) 1200 1200
H(mm) 1850 1850

 

FAQ:

 

Q:Can you offer installation service of cold storage ?

A:Our engineer can go to your site and offer your instructions service

 

 

Q:how to quote for a cold storage project?

A: you have to offer us your cold storage size , room temperature , voltage , refrigerant , compressor brand , cooling method , products , products weight and cooling time , then we can calculate and suggest you suitable machines.

 

Q: can you accept OEM design ?

A: we usually promote our Zhexue Brand , but OEM design is acceptable.

 

 

Installation notice

 

Before installing the compression condensing unit, the installation foundation must be horizontally calibrated to ensure that the unit is installed horizontally. Inclined installation of the unit will cause the compressor to be short of oil and damage the compressor.

After the condensing unit and evaporators are connected, the vacuum should be evacuated for more than 30 minutes to make the vacuum degree below 120Pa to ensure that the vacuum degree of the system meets the requirement.

 

Although the system is equipped with a filter drier, normal vacuuming operations must be performed before charging with refrigerant.

When the condensing unit is higher than the installation height of the evaporators, the number of oil traps shall be calculated based on the height difference between the evaporators and the condensing unit, and one oil trap shall be provided for at least 4m increase.

 

 

Production line:

 

Bitzer open crew compressor conednsing unit

 

bitzer piston compressor racks condensing unit

01

02

03

04

05

06

07

08

Hot Tags: condensing unit with piston compressors with co2 refrigerant, China condensing unit with piston compressors with co2 refrigerant manufacturers, suppliers, factory, Low Noise Ceiling Mounted Evaporator, Ceiling Evaporator Stainless Steel, Industrial Ceiling Mounted Evaporator, Double Side Blow Evaportaor, Cold Storage Double Side Blow Evaporator, Cold Room Commercial Evaporator

Send Inquiry