Anti-corrosion industrial condensing unit
The anti-corrosion industrial condensing unit is a high quality, durable and reliable unit designed for industrial use. It has an anti-corrosion coating that can withstand harsh environments and prevent corrosion and rust. The unit is compact, space-saving, and quiet, making it suitable for a variety of Settings, both indoor and outdoor locations. It consumes very little energy, keeping energy costs low while ensuring superior performance. It is also equipped with a simple and effective control system that makes it easy to operate and maintain.
There are various models and configurations of anti-corrosion industrial condensing units, and enterprises of different sizes and industrial environments can find products that meet their needs. We choose anti-corrosion shell and tube type evaporators and condensers , sometimes those condensing unit are used for the fish boat , chemical factory and other extreme environment.
|
HANBELL screw compressor racks condensing unit for middle room temperature |
|||||
|
Unit model |
MHZLGF4- |
MHZLGF4- |
MHZLGF4- |
||
|
Refrigerant |
R507(R404A) |
||||
|
Power supply |
380V/3P/50HZ |
||||
|
Compressor |
Model |
RC2-100D-P |
RC2-140D-P |
RC2-180D-P |
|
|
Qty |
4 |
4 |
4 |
||
|
Evaporating Temperature |
(-30℃~+10℃) |
||||
|
Evap.Temp |
-10℃ |
Cooling capacity(KW) |
244 |
337.2 |
443.2 |
|
-10℃ |
Power input(KW) |
97.6 |
128.4 |
161.2 |
|
|
-28℃ |
Cooling capacity(KW) |
134.8 |
186.4 |
246 |
|
|
-28℃ |
Power input(KW) |
91.2 |
120.4 |
151.2 |
|
|
Liquid pipe(mm) |
Φ42 |
Φ42 |
DN50 |
||
|
Suction pipe(mm) |
DN100 |
DN100 |
DN150 |
||
|
Oil separator outlet(mm) |
DN65 |
DN65 |
DN80 |
||
|
Receiver inlet(mm) |
DN50 |
DN50 |
DN65 |
||
|
Overall size |
L(mm) |
4600 |
4600 |
4600 |
|
|
W(mm) |
1950 |
1950 |
1950 |
||
|
H(mm) |
1700 |
1700 |
1700 |
||
◆ Installation location
Please choose the suitable installation location as follows:
1.The unit must be installed outside the building in a location with good ventilation and smooth exhaust, and should be installed on level ground and a solid support.
2.The condensing unit and the air cooler should be as close to each other as possible to minimize the height difference between the compression condensing unit and the air cooler and the number of elbows in the pipes.
3.Avoid placing the condensing unit under a window or between buildings, or operating noise will be transmitted indoors.
4.There should be no strong heat sources, exhaust outlets of other equipment, steam and flammable gases around the unit.
5.There should be appropriate space around the unit for normal operation and maintenance. Rubber pads should be added between the frame and the support during installation to reduce the spread of vibration.
FAQ
Q: What is your delivery time for normally products?
A: Usually for condensers and evaporators, delivery time is 7 days, but if you change the components, that would be longer.
Q: Can we use our own logo?
A: Yes, we can print your private logo according to your request.
Q: Do you provide sample? Is it free?
A: If the sample is low value, we will provide the free sample with freight collect. But for some high value samples, we need to collect the sample charge.
Hot Tags: anti-corrosion industrial condensing unit, China anti-corrosion industrial condensing unit manufacturers, suppliers, factory, condensing unit for industrial retail, refrigeration condensing unit for hotels, industrial condensing unit supplier, commercial condensing unit maintenance, refrigeration condensing unit for fruit storage, commercial condensing unit for fruit storage