High temperature industrial condensing unit
Zhexue brand high temperature industrial condensing units are designed to handle extreme environmental conditions and provide reliable and high performance cooling. With its compact construction, the unit can withstand the most demanding industrial environments.
It features advanced condensation technology that effectively removes heat and cools the flow of hot air to the desired temperature level. One of the main advantages of high-temperature industrial condensing units is their energy efficiency. Its advanced technology and innovative design improve cooling performance while minimizing energy consumption. This reduces operating costs and improves sustainability.
In addition to their impressive performance, our high-temperature industrial condensing units are also easy to install and maintain. It features a user-friendly control panel and interface that enables operators to easily monitor and control temperature, pressure and other key parameters. Regular maintenance and cleaning of the unit can be done quickly and easily, improving its life and reliability.
Performance parameters
|
HANBELL screw compressor racks condensing unit for middle room temperature |
|||||
|
Unit model |
MHZLGF3- |
MHZLGF3- |
MHZLGF3- |
||
|
Refrigerant |
R507(R404A) |
||||
|
Power supply |
380V/3P/50HZ |
||||
|
Compressor |
Model |
RC2-100D-P |
RC2-140D-P |
RC2-180D-P |
|
|
Qty |
3 |
3 |
3 |
||
|
Evaporating Temperature |
-30℃~+10℃ |
||||
|
Evap.Temp |
-10℃ |
Cooling capacity(KW) |
183 |
252.9 |
332.4 |
|
-10℃ |
Power input(KW) |
73.2 |
96.3 |
120.9 |
|
|
-28℃ |
Cooling capacity(KW) |
101.1 |
139.8 |
184.5 |
|
|
-28℃ |
Power input(KW) |
68.4 |
90.3 |
113.4 |
|
|
Liquid pipe(mm) |
Φ42 |
Φ42 |
Φ42 |
||
|
Suction pipe(mm) |
DN100 |
DN100 |
DN100 |
||
|
Oil separator outlet(mm) |
DN65 |
DN65 |
DN65 |
||
|
Receiver inlet(mm) |
DN50 |
DN50 |
DN50 |
||
|
Overall size |
L(mm) |
3800 |
3800 |
3800 |
|
|
W(mm) |
1950 |
1950 |
1950 |
||
|
H(mm) |
1700 |
1700 |
1700 |
||
|
cooling capacity and power input are calculated @35℃ condensing temperature, it is suitable for evaporation condenser. |
|||||
Our company compressor racks refrigeration unit features as following
◆Compared with the single compressor-condensing unit, the users choose compressor racks unit can save around 10% cost for same cold storage, and save more than 15% power consumption.
◆Compared with the single compressor-condensing unit, the compressor racks unit can reduce the temperature of the cold storage rapidly and improve the utilization ratio of the storage.
◆the refrigeration unit is assembled in one frame , iti is convenient for construction, installation, maintenance and management.
◆ Each Refrigeration unit produced by our company has undergone drying, vacuum, leak detection and 2.4 MPA pressure testing, and protective nitrogen filling for transportation and inspection. All electronic components are convenient for maintenance, adjusting and repair.
◆Refrigeration unit has been connected all pipes and electronic wires at factory, you can installation at your site. During the installation , you should connect our refrigeration unit with evaporators, pipes and wires to controllers.
FAQ
Q: What is your delivery time for normally products?
A: Usually for condensers and evaporators, delivery time is 7 days, but if you change the components, that would be longer.
Q:When can I get the price?
A:Usually we quote within 24 hours after we get your inquiry.
Q: Do you provide sample? Is it free?
A: If the sample is low value, we will provide the free sample with freight collect. But for some high value samples, we need to collect the sample charge.
Hot Tags: high temperature industrial condensing unit, China high temperature industrial condensing unit manufacturers, suppliers, factory, Water Cooled Condensing Unit with Screw Compressor, High Temperature Water Cooled Condensing Unit, Low Noise Ceiling Mounted Evaporator, Water Circulation Water Cooled Condensing Unit, Ceiling Evaporator For Commercial Use, Multi Effect Double Side Blowing Evaporator