Cold room double side blow evaporator
Cold room double side blow evaporators consist of a set of fins or plates to increase the surface area for heat exchange. The fins are in contact with the refrigerant, which evaporates and absorbs heat from the environment.
Double-sided blowing design also reduces the risk of frost buildup, which can occur when there is insufficient airflow over the evaporator.
When the roof space is limited , and for the workshop which has person inside , we will suggest customer use cold room double side blow evaporator, as this air blow will not direct to people , and it save much space.
Main features
1.Designed by the advanced European technology , make the products more efficiency.
2.The external casing is s/s or galvanized steel sheet with electrostatic spraying technology, comply with hygiene standards.
3.Using 15.88mm copper pipe,9.52mm and 12.7mm inner thread copper pipe, special length between pipes and advanced technology of heat exchange surface make our evaporator more efficiency.
4.We have windshield at the bottom of the fan coils, it can prevent the air through the water tray,then more wind will through out the fan coils to improve the heat exchange efficiency.
Inspection before installation of evaporators
After unpacking the outer packaging, the following inspections should be made:
1)Check whether all connecting parts are loose. All components should be connected firmly and reliably.
2)Check whether the blades of the axial flow fan are loose. The fan blades should be firmly connected.
3)Check whether the fan blades and the protective cover are in contact. The fan blades should rotate freely without friction or collision with the protective cover.
4)Check whether the evaporator is damaged or deformed due to transportation. If it is damaged, it cannot be installed and used.
Performance parameters
|
Φ630mm-6P R404A |
|||||||
|
C06=6mm Fin space |
|||||||
|
Model |
MJL632C06R6-E |
MJL632C06R8-E |
MJL633C06R6-E |
MJL633C06R8-E |
MJL634C06R6-E |
MJL634C06R8-E |
|
|
|
SC1(△t=10K) |
65.60 |
79.80 |
99.40 |
120.60 |
132.70 |
160.80 |
|
SC2(△t=8K) |
44.10 |
53.80 |
67.40 |
81.90 |
89.20 |
108.40 |
|
|
SC3(△t=7K) |
34.70 |
41.50 |
52.30 |
63.10 |
70.30 |
83.70 |
|
|
SC4(△t=6K) |
28.60 |
34.10 |
44.00 |
52.60 |
57.10 |
68.90 |
|
|
SC5(△t=6K) |
27.60 |
33.40 |
41.90 |
50.70 |
56.10 |
67.60 |
|
|
heat exchange area(m2) |
208.60 |
278.80 |
315.00 |
420.10 |
420.90 |
561.30 |
|
|
tube volume (dm³) |
42.80 |
59.30 |
67.00 |
89.30 |
89.50 |
119.40 |
|
|
air flow rate (m³/h) |
28400 |
27400 |
42700 |
41200 |
57000 |
55000 |
|
|
total fan power (W) |
3700 |
3700 |
5550 |
5550 |
7400 |
7400 |
|
|
total fan current (A) |
6.40 |
6.40 |
9.60 |
9.60 |
12.80 |
12.80 |
|
|
air flow (m) |
62 |
61 |
65 |
64 |
67 |
66 |
|
|
defrost power (W) |
16200 |
24300 |
22200 |
33300 |
28800 |
43200 |
|
|
pipe dia in/out (Φmm) |
35/64 |
35/64 |
35/76 |
35/76 |
42/76 |
42/84 |
|
|
noise(db) |
70 |
70 |
72 |
72 |
72 |
72 |
|
|
weight(kg) |
385 |
410 |
580 |
615 |
770 |
810 |
|
FAQ
Q: Can you accept OEM design?
A: We usually promote our Zhexue Brand, but OEM design is acceptable.
Q:When can I get the price?
A:Usually we quote within 24 hours after we get your inquiry.
Q: Which shipping way can you provide?
A: We can provide shipping by sea, by air and by express.
Hot Tags: cold room double side blow evaporator, China cold room double side blow evaporator manufacturers, suppliers, factory, Double Side Blow Evaportaor, Low Temperature Commercial Condensing Unit, Small Quick Freezing Evaporator, Ceiling Type High Temperature Evaporator, Industrial Condensing Unit, Anti corrosion Industrial Condensing Unit