Products
Multi Effect Double-side Blowing Evaporator
video
Multi Effect Double-side Blowing Evaporator

Multi Effect Double-side Blowing Evaporator

Zhexue multi effect double-side blowing evaporator is suitable for any kinds of cold storage for the food vegetables food processing workshop and logistics center. The compact design of our evaporators save much space for our clients, we also choose the external fan motor with lower noise to build a comfortable environment.

Multi effect double-side blowing evaporator

 

Zhexue multi effect double-side blowing evaporator is suitable for any kinds of cold storage for the food vegetables food processing workshop and logistics center. The compact design of our evaporators save much space for our clients, we also choose the external fan motor with lower noise to build a comfortable environment. Zhexue multi effect double-side blowing evaporators' cooling capacity range is from 1.0kw to 210kw, they are used for Freon such as R134A,R22,R404A,R507C and R407C.

 

Main features

 

1. Using15.88mm copper pipe,9.52mm and 12.7mm inner thread copper pipe, special length between pipes and advanced technology of heat exchange surface make our evaporator more efficiency.
2. Equipped with the extended wind guide,it can improve the motors efficiency and raise the air flow (motors more than 500mm).
3. We have windshield at the bottom of the fan coils, it can prevent the air through the water tray, then more wind will through out the fan coils to improve the heat exchange efficiency.

 

Inspection before installation of evaporators

 

After unpacking the outer packaging, the following inspections should be made:

1)Check whether all connecting parts are loose. All components should be connected firmly and reliably.

2)Check whether the blades of the axial flow fan are loose. The fan blades should be firmly connected.

3)Check whether the fan blades and the protective cover are in contact. The fan blades should rotate freely without friction or collision with the protective cover.

4)Check whether the evaporator is damaged or deformed due to transportation. If it is damaged, it cannot be installed and used.

 

Performance parameters

 

Φ450mm-4.5P R404A

C04=4.5mm fin space

model

MJH451C04R4-E

MJH451C04R6-E

MJH452C04R4-E


Cooling capacity (kw)

SC1(△t=10K)

11.82

15.08

23.79

SC2(△t=8K)

7.54

10.00

15.56

SC3(△t=7K)

6.00

7.56

11.98

heat exchange (㎡)

34.60

51.80

68.00

tube volume (dm³)

6.5

9.4

12.7

air flow rate (m³/h)

6090

5670

12110

total fan power (W)

540

540

1080

total fan current (A)

0.84

0.84

1.68

air flow (m)

23

23

23

defrost power (W)

4500

5400

7500

pipe dia(in/out Φmm)

16/28

16/28

16/35

noise(db)

51

51

54

weight (kg)

56

59

56

 

FAQ

 

Q: Can you offer installation service of cold storage?

A: Our engineer can go to your site and offer your instructions service.

 

Q: What is your delivery time for normally products?

A: Usually for condensers and evaporators, delivery time is 7 days, but if you change the components, that would be longer.

 

Q: Which shipping way can you provide?

A: We can provide shipping by sea, by air and by express.

01

02

03

04

05

06

07

08

Hot Tags: multi effect double-side blowing evaporator, China multi effect double-side blowing evaporator manufacturers, suppliers, factory, evaporator for commercial tropical restaurants, evaporator for commercial alpine restaurants, evaporator for commercial south asian restaurants, commercial refrigeration equipment evaporator, evaporator for commercial north american restaurants, Cold Room Commercial Evaporator

Send Inquiry