From the above concepts of evaporator and condenser, it can be seen that the difference between the two is that the condenser is mainly used to discharge heat, while the evaporator is used to absorb heat.
The main difference between evaporators and condensers lies in their different working forms. Evaporators absorb heat from the medium for vaporization and external heat absorption, while condensers are devices that cool and liquefy the medium, releasing heat to the outside.
Evaporators and condensers also have different structures.
In evaporator design, selection and design should be based on the evaporation capacity and materials of the entire system.
In the design of condensers, the inlet and outlet of different paths should be as close as possible, and the inlet and outlet should also be as far away as possible to avoid losing some heat exchange due to reheating and uneven flow distribution.
In practical design, if there are more than two branches, centralized separators and collectors should be used to ensure uniform flow between different flow paths. The pipe passes of different flow paths should be the same, and should flow evenly through the windward and leeward sides to ensure uniform heat transfer.
The above is a brief introduction to the difference between evaporators and condensers. The difference between evaporators and condensers lies in the fact that they are heat releasing devices and heat absorbing devices.